Nutrients can broadly be categorized by micro or macro and in terms of their mobility; either mobile or immobile. Mobile nutrients are those that the plant can move around to where they are most needed while immobile nutrients cannot be relocated. This mobility of the nutrient affects where symptoms of deficiency (or excess) can occur on a plant.
Buying fertilizer
Most fertilizers on the market come in 2 categories; general nutrients for the vegetative stage and flowering (or bloom) nutrients for the flowering stage of growth. Vegetative nutrients contain large amounts of Nitrogen and flowering nutrients contain mostly Potassium and Phosphorus. There are also solutions that provide micronutrients, sugars, and acids to boost growth even further.
An increasingly discussed distinction between fertilizers/additives is the difference between organic and synthetic. This mostly refers to the method of extraction, origin, and form of the nutrients included in the fertilizer. For example, amino acids can be synthesized chemically or they can be provided organically via fish meal. Synthetically derived nutrients tend to be in salt forms. Both organic and synthetic nutrients can be used together, and the decision of whether to use the former or the latter is often decided by an individual's growing arrangement.
Common Fertilizer Ingredients
Macro Nutrients
Macronutrients are those nutrients that Cannabis requires in large amounts, the three main nutrients are Nitrogen, Phosphorus, and Potassium (often written as NPK). They typically come from the soil and are crucial throughout the plant's lifespan, although in differing ratios.
Vegetating plants require more Nitrogen and less Phosphorus and Potassium, while flowering plants demand much less Nitrogen and much more Phosphorus and Potassium during the flowering stage. A rough guide NPK ratio:
| Stage | N | P | K |
| Vegetative stage | 3 | 1 | 2 |
| Flowering stage | 1 | 1 | 2 |
| Final Flowering Stage | 0 | 1 | 2 |
It's worth noting that the NPK ratio stated on a bottle of fertilizer does not reveal anything about the absolute amount of Nitrogen, for example, in the product.
Nitrogen
Required for the production of most plant cells as well as chlorophyll, used in photosynthesis.
Phosphorus
Essential for the flowering period, Phosphorus strengthens the plant and is used for root development.
Potassium
Required for root development. Potassium also regulates the opening and closing of stomata for gas exchange.
Cannabis also obtains Oxygen, Carbon, and Hydrogen from water and air.
Micro Nutrients
Micronutrients are the elements that are needed in much smaller quantities than macronutrients, however, this does not make them any less important.
Silica
Silicon dioxide or "Silica" can increase stem diameter and boost chlorophyll production.[1] Found in Diatomaceous earth.
Magnesium
A mobile nutrient required for the creation of chlorophyll in a plant, a requirement of Photosynthesis.
Calcium
An immobile nutrient that is required for the creation of strong cell walls.
Boron
Similar to calcium, boron is required for strong cell walls.
Copper
Copper is used in photosynthesis by helping metabolize proteins and carbohydrates.
Iron
Iron supports the function of chloroplasts.
Manganese
Sulphur
Zinc
Molybdenum
Chloride
Chloride refers to Cl-, not to be confused with the toxic form chlorine CI. Essential for the proper function of stomata.
Acids
Acids chelate other nutrients making them more water-soluble and thus more available to the plant. Humic acid is commonly used to increase the number of nutrients that the cultivar can absorb.
Amino Acids
Humic and fulvic acids
Enzymes
Enzymes help speed up the breakdown of nutrients and carbohydrates. Adding enzymes can significantly speed up flowering time.
A group of enzymes, known as Diastase, can be found in malted barley[2].
Amylase
Microbes
Bascillus
A genus of beneficial bacteria with 266 named species.
Fungus
Mycorrhizal Fungi
Some fungi can live symbiotically with the plant's root system, they consume some glucose created by the plant while increasing nutrient uptake. Some soil mixes come with mycorrhizae already added, you can buy it separately and combine it with your medium, or it can be added to the medium in the hole where a plant will be transplanted.
Sugars and Carbohydrates
Chitin
A key component of insect exoskeletons, shells of crustaceans, fungi, and components of other invertebrates. In plants, it benefits pest and disease resistance as well as being a strong chelator and increasing the production of secondary metabolites.
Molasses and oligosaccharides
Plant Growth Regulators (PGRs)
PGRs are a group of hormones that are used to increase the density of buds and reduce plant height. There are organic PGRs but there are also a number of synthetic PGRs that are known to be carcinogenic and toxic to the liver. PGRs are generally not recommended for use on cannabis unless you know exactly what the PGRs is and how it was sourced.
Trianconatol
A phytohormone found in Alfalfa that acts as a stimulant. It increases the rate of photosynthesis by increasing the production of chlorophyll, and assimilation of CO2. It also increases the rate of cell growth and reduces stress.
The sequence of nutrition
The biochemical sequence depicts the order in which nutrients are required by the plant and the interconnections between nutrients.
Nutrient antagonism
High concentrations of one nutrient can decrease the bioavailability of another, this is known as nutrient antagonism. For example, high Nitrogen will decrease the availability of Boron.
Deficiencies
Most deficiencies present as a color change on the leaves, moving from the center outwards or from the edge of the leaf moving inwards. Deficiencies can appear on older leaves first or newer leaves first. Mobile nutrient (such as NPK) deficiencies will show on older leaves first as the plant moves nutrients to the younger leaves. Deficiencies will remain in leaves that have already finished growing even after it is remedied in fresher leaves. This means you must be patient in remedying mobile deficiencies
Nutrients can be added to the growing medium before planting if possible, to avoid deficiency.
Nutrient lockout
Nutrient lockout occurs when the pH is too high or too low for the plant to properly absorb nutrients. This leads to a deficit of necessary nutrients for growth and/or survival. A nutrient lockout can also occur when the grow medium accumulates too much salt or other nutrients.
Pre-mixing nutrients
If you intend to mix nutrients in water in large quantities and leave it to sit for a period of time one should consider the nutrients used and how they may change over time. When mixing organic nutrients in water they will respire aerobically for a period of time, until they run out of oxygen and then begin to respire anaerobically. This destroys some of the bacteria's capabilities and makes for a less effective feed. The water will begin to smell like a pond or an asshole when the bacteria begin to respire anaerobically which is a surefire way to tell. Synthetically derived nutrients may last longer in water but can also become less effective as some nutrients may combine to create less accessible forms of the nutrient for the plant.
Methods of Nutrient delivery
Via growing medium
The most simple method of nutrient delivery is by mixing with the water to be used for watering the cultivar. Take note that the growing medium will affect the stability of the pH in the plant's root zone. Organic soils provide more of a pH buffer than hydroponic systems because, in organic soil, there are other organisms that help regulate pH. Even though nutrients have been added to the growing medium they will not be bioavailable to the plant instantly. Other organisms, such as Mycorrhizal Fungi and Microbes, help in the process of breaking down nutrients so that they are useable by the cultivar.
Foliar Spray
Nutrients can be delivered to the plant when dissolved in water via a fine mist, this is the fastest route of administration. It has been postulated that the size of the droplets has an effect on the efficacy of foliar spray but some studies seem to contradict this[3]. If possible the spray should be applied to the underside of leaves as this is where most stomata reside. Lights should be turned off before foliar spraying to prevent the light lensing through droplets burning the leaf surface. Foliar spray should not be used to provide emergency nutrients to the plant.
Sources of nutrients
Nutrients can be provided to a cultivar via concentrated liquid solutions, dry amendments, organic materials, and even other organisms living in the growing medium.
If you are trying to provide NPK organically you can check the NPK values of most organic materials at thenutrientcompany.com
Flushing
In the last two weeks before harvest, a plant should be fed water with no added nutrients/fertilizer. This is to ensure the cultivar is able to metabolize all nutrients it has absorbed from the soil.[4] This leads to a smoother smoke containing less damaging compounds. The color of the ash left by burning cannabis can indicate how much fertilizer is present and if the plant was flushed or not. White ash indicates low amounts of excess nutrients leftover and black ash indicates high amounts or possibly no flushing period.
References
- ↑ https://www.maximumyield.com/simply-silica/2/1077
- ↑ Malt extract - https://www.pharmacy180.com/article/malt-extract-337/
- ↑ Influence of Droplet Size of Foliar-Applied Nitrogen on Grain Protein Content of Hard Red Winter Wheat 2017 -https://acsess.onlinelibrary.wiley.com/doi/pdf/10.2134/cftm2016.10.0068
- ↑ https://www.youtube.com/watch?v=qPh285tuVHw&ab_channel=TheGanjier Simon Hart, The Ganjier @ 13:08